Tel: +44 (0)116 2775730

VisionRGB-PRO  PC Capture card for Analogue RGB Data Some working environments require  constant access to VGA data from another source. Traditionally this data is  transmitted over special cabling as an analogue RGB signal for display on dedicated screens which sit alongside other Windows® based screens. The drawback of such a solution is that you need an extra monitor for every RGB data feed and  therefore reduced space in the work environment. The VisionRGB-PRO is the ideal  solution to this problem - and means you can integrate the RGB data and get rid of the dedicated terminal. A standalone PCI plug in card, the VisionRGB-PRO captures the display output (e.g. the analogue RGB/VGA data) from one computer screen and then displays it as an independent application, in real time, on your Windows® desktop. The VisionRGB-PRO has two VGA compatible inputs for simultaneously feeding two independent data sources directly into your main PC. The data is then converted on the VisionRGB-PRO and displayed as a standard  Windows® application on your desktop. All your data in one place, and no need for that dedicated monitor!! The VisionRGB-PRO can be operated with any standard graphics adapter and is supplied with Windows 2000 and XP drivers. For applications requiring improved update rates and lower system overhead then we recommend using either the Horizon or iH range of graphics adapters. The VisionRGB software, when used with the iH4 graphics cards, implements direct DMA to the graphics texture memory. The captured RGB is then rendered to the display using hardware texture mapping to greatly improve performance. This implementation dramatically improves update rates when the image is up-scaled as would be required with video/data wall applications. Each part of the up-scaled image is rendered by the associated  graphics processor, effectively parallel processing the up-scaling  process. The VisionRGB-PRO is also supplied with a powerful software application for configuring the timing and the format of the input sources and  displaying the captured data. We also provide an SDK so you can interface the Vision RGB-PRO to your own applications. Applications Desktop  Applications Display Captured RGB Video in a scaleable window Multi-Screen Desktop Applications Use the iH4 or the Horizon for high performance  multi-screen and multi-channel RGB capture. Data/Video Wall  Applications VisionRGB-PRO, in conjunction with the iH4 or Horizon providing high performance upscaling and multiple RGB capture channels. Technical  Specifications Board Format: PCI Level 2.1 compliant, half size plug-in card 105mm x 170mm PCI Bus Master with  scatter / gather DMA providing up to 132 MBytes per second data transfer Connectors: Two VGA D Type connectors Maximum Sample Rate: 280 Mpixels per  second Video  Sampling: 16 bits per pixel  / 5:6:5 format Video Capture  Memory: 6 MBytes per channel (updated in real time) RGB Mode Support: 640 x 480; 800 x 600; 1024 x 768; 1600 x 1200 Pixel Display  Formats: 555, 565 or 888  pixels Update Rate: User defined, typically up to 30 updates per second Video Format Options: RGB plus HSync and VSync (5 wire) RGB with Sync on Green (3 wire) RGB with Composite Sync (4 wire) Operating System Support: Windows NT4; Windows 2000; Windows XP Power  Requirements: VisionRGB-PRO1: 8  watts(max), +5v @ 1.5A, +12v @ 150mA VisionRGB-PRO2: 10 watts (max): +5v @ 2A , +12v @ 200mA Operating  Temperature: 0 - 35 deg C Storage  Temperature: -20 - 70 deg C Relative humidity: 5% to 90%  non-condensing Software Features Setup  Wizard: Input Source Selection Video Format Selection Horizontal and Vertical Position Horizontal Phase Picture Adjustments Black Level Clamping Properties: Brightness and Contrast Sample Rate Hardware up and downscaling for re-sizing the captured video. The VisionRGB-PRO uses specialised dual ported video memory to ensure the highest possible performance with low system overhead. The VisionRGB has 6MBytes of video capture memory per  channel and can capture data at 640 x 480, 800 x 600, 1024 x 768 and 1600 x 1200  resolutions. The VisionRGB-PRO captures data at a maximum rate of 280Mpixels per second. Once captured, the data is converted to either 555, 565 or 888 pixel display formats and then transferred over the PCI bus to host memory, for display on the desktop. Dynamic Input Source Selection Administrator Mode Update Indicator Always on Top Models Available The VisionRGB-PRO is available in two models, the RGB-PRO-1  and the RGB-PRO-2. The Vision RGB-PRO-1 is a  single channel PCI Capture card whereas the RGB-PRO-2 is a dual channel (simultaneous capture) PCI Capture Card. For more information on these  products get in touch by using the form on the Contact  page.  Typical Applications & Market  Areas Financial  Applications , Display & Process  Monitoring , Video Conferencing , CAD / CAM / CAE

EMS Ltd, UK. Tel: +44 (0)116 2775730, Fax: +44 (0)116 2774973
Contact Webmaster@multiscreenvideo.com with comments or questions regarding this site.
© Copyright, Electronic Modular Solutions Ltd., All rights reserved.