EMS iVu4-H Stand Alone Video Wall Controller

Click to enlarge

Price:
Call for pricing +44 (0)116 224 0197

iVu4-H Video Wall Controller

iVu4-H, 4 output (1x4) selectable to 1x3 or 1x4, up to 4096 x 768 combined output resolution, DVI Dual-Link input and 4 x DVI single link outputs. Clone Mode or Full mode, Inc. Remote Control. 

 

Stand - Alone Video Wall / Multi-Screen Controller

 


EMS's iVu4-H video wall / Multi-Screen controller helps in combining 4 (1x4) LCD displays to produce one large video wall. The iVu4-H receives and displays the images or video content on any size LCD monitor with a selectable display mode and supports a maximum resolution of up to 4096 x 768 input video wall controller, 1 Dual-link DVI input, 4 Single-link DVI output (1 x 4) 1024x768 per display. The iVu4-H is compatible with any brand of LCD monitor and suitable for large display applications in large advertising, medical imaging, simulation inc. flight, radar, gaming etc.., shopping centres, public gathering locations, fairs and exhibitions, sporting or music events.

To buy a large display for advertisement, for example 64 or 84 inches LCD, is too high to afford. A video wall is a group of smaller displays tiled together in a matrix to create one large display. EMS provides the controller box that drives the display over multi-screens. All the video wall controllers support different configurations of the video output signals. The videowall control (OSD) buttons are located on the front panel of the video wall controller for easy access, while all the video and power cables are connected to the rear panel for convenient cabling. The video controllers can be connected to LCD or DLP panels, video wall cubes, projectors or any monitor that accepts a DVI input signal.


The features of EMS iVu4-H video wall controller include:

 

  • • Fan-less design for any implementation
  • • Provide 1 image source input Dual-Link DVI and 4 DVI outputs to four (1x4) monitors
 

 

1. Display mode choice(Clone, full mode)
2. Support (1x3),(1x4)output selection
3. Software OSD control
4. GeniMASKTM bezel masking function

 

The EMS iVu4-H video wall controller supports various display modes that include:

  
  1. Clone mode (1x1): The iVu4-H unit displays the same content on the four screens
  2. Full mode (1x4): The iVu4-H unit divides the input image into four sections and places each 1/4 image per screen to fit to the selected resolution on each monitor. The full display also support mask enable and disable .
  3. Up to 4096x768 Dual-Link DVI input and up to 4 * 1024x768 outputs per display
  4. On Screen Display/Remote control functions for selecting; Display mode; Output resolution; Border mask enable/disable and frame wideness adjustment.
  5. Bezel mask or screen border adjustment, this is quite an important function, normally the display will be 'staggered" from screen to screen due to the use of conventional LCD/Plasma displays, but with this function you can adjust the display to be seamless, e.g mask-out the screen bezel enabling a visually seamless display.
  6. RS-232 communication for remote control (if required)
  7. Easy-DIY to install and control the videowall or multi-screens, either from a PC, Laptop, Remote control or Front Panel.
  8. Multiple units can be used for larger screen configurations, e.g. by installing a dual channel graphics card into a PC then two iVu4-H's can be connected to enable a 1x8 video wall / multi-screen display or one iVu4-H can be cascaded to four further units to enable a 1x16 videowall / multiscreens. All iVu controllers can be "mixed & Matched" to enable various display configurations.
  9. Optional Live DVI/VGA video insertion, the XtremeRGB (optional purchase) can be installed within the PC that controls the iVu4, this will enable not only a videowall/multi-screen display with all of Windows applications, but also live video from other sources that provide DVI or VGA outputs, such as Servers, Workstations, Hdmi players, DVI cameras etc..

 


Support Various Display Modes:

  
Clone Mode   Full Mode      
       
- Clone mode (1x1):   - Full mode (2x2):      
The iVu4-H displays the same content on the four screens.   The iVu4-H divides the input image into four sections and stretch the 1/4 image to fit to the selected resolution each monitor. The full display also support mask enable and disable.    
Features 1. Display mode choice(Clone & full)
2. Software OSD control
3.GeniMASKTM bezel masking function
Box Size Height:47mm (with rubber foot 53.4mm)
Depth:120.7mm
Width:229.5mm
Cooling Fanless
Front Panel 6 x LED (1xInput, 4xOutput, 1xPower)
1x 6 keys
Rear Panel 1 x DVI dual-link input
4 x DVI single-link output
1 x Power (In) with locked
1 x Power switch
Resolution
Clone Mode
Input
Output
640x480 @ 75Hz 640x480 @ 75Hz
800x600 @ 60Hz 800x600 @ 60Hz
1024x768 @ 60Hz 1024x768 @ 60Hz
1280x1024 @ 75Hz 1280x1024 @ 75Hz
Full Mode
Input
Output
1600x600 @ 60Hz (2 x 800x600 @ 60Hz)
2048x768 @ 60Hz (2 x 1024x768 @ 60Hz)
2560x1024 @ 60Hz (2 x 1280x1024 @ 60Hz)
3200x1200 @ 60Hz (2 x 1600x1200 @ 60Hz)
3840x1080 @ 60Hz (2 x 1920x1080 @ 60Hz)
3840x1200 @ 60Hz (2 x 1920x1200 @ 60Hz)
4092x1536 @ 30Hz (2 x 2048 x 1536 @ 30Hz)
2400x600 @ 60Hz (3 x 800x600 @ 60Hz)
3072x768 @ 60Hz (3 x 1024x768 @ 60Hz)
3840x1024 @ 60Hz (3 x 1280x1024 @ 60Hz)
4092x768 @ 60Hz (3 x 1366x768 @ 60Hz)
3200x600 @ 60Hz (4 x 800x600 @ 60Hz)
4092x768 @ 60Hz (4 x 1024x768 @ 60Hz)
1024x3072 @ 60Hz (4 x 1024x768 @ 60Hz)

 
Power Consumption 10W
Power Connector DC Power Jack
OSD 1. Power On/Off
2. Output resolution selection
3. GeniMASKTM bezel masking control
Temperature 0°C~40°C
Safety & Emission Meet CE, FCC, and CCC
Power Adapter Input 90VAC to 264VAC/47Hz to 63Hz
Power Adapter Output DC 12V
 
1 * Video Wall Box 1 * DC 12V Power Adapter
1 * Power Cord 1 * Dual-link DVI cable (Length:1.8M)
1 * User manual and utility CD 2 * Mount Bracket
1 * Screw Kit  

Find Similar Products by Category

  • StandAlone Videowall